Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 3.54 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Case Drain | None |
| Inlet Pressure [Max] | 2500 psi |
| Displacement (in³/rev) | 3.54 |
| Mounting Type Code | H |
| Series | H Series |
| Pressure [Max] | 1800 psi |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Shaft Size & Type | Splined |
| Output Shaft Code | 16 |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Seal Material | Buna-N |
| RPM [Max] | 953 rpm |
| Shaft Type | Splined |
| Mounting Holes | 0.565 in |
| Port Type | BSPP |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Special Features | Free Running Gerotor |
| RPM [Min] | 953 rpm |
| Special Features Hardware Code | AA |
| Mounting Hole Size | 0.565 in |
| Paint/Packaging | No Paint, Individual Box |
| Pilot Diameter | 4 in |
| Flow Rate | 57 lpm |
| Special Features Assembly Code | 0 |
| Bolt Circle Dia. | 5 3/4 in |
| Mount Type | 2 Bolt, SAE B |
| Output Torque at Rated PSI (inch/pounds) | 802 in lb |
| Port Code | E |
| Splines | 6 |
| Port Location | Side Port |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Paint Code | 0 |
| Port Size | 1/2 |
| Rotation | Standard Rotation |
| Case Drain Code | 0 |
| Weight | 13.0 LB |
