Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mount Type | 2 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Flange Rotated 90° |
| RPM [Max] | 760 rpm |
| Duty | Standard-Duty |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1800 psi |
| Special Features | Flange Rotated 90° |
| Port Size | SAE-10, 7/8-14 UNF |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Mounting Hole Size | 0.535 in |
| Special Features Assembly Code | 2 |
| Paint Code | A |
| Displacement (in³/rev) | 4.5 |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Rotation | Standard Rotation |
| Port Size & Location | SAE-10 Side |
| Output Shaft Code | 01 |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Case Drain Code | 0 |
| RPM [Min] | 760 rpm |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.19 in |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Seal Material | Buna-N |
| Mounting Type Code | A |
| Port Type | SAE O-Ring |
| Case Drain | None |
| Port Location | Side Port |
| Port Code | A |
| Flow Rate | 15 gal/min |
| Weight | 13.0 LB |
