Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mount Type | 2 Bolt |
| Special Features | None |
| Shaft Type | Straight |
| Mounting Type Code | A |
| Splines | 0 |
| Port Type | NPTF |
| RPM [Max] | 969 rpm |
| Bolt Circle Dia. | 4.187 in |
| Special Features Hardware Code | 00 |
| Output Torque at Rated PSI (inch/pounds) | 650 in lb |
| Shaft Size & Type | Straight |
| Duty | Standard-Duty |
| Flow [Max] | 12 gal/min |
| Case Drain | None |
| Port Size | 1/2 |
| Displacement (in³/rev) | 2.81 |
| RPM [Min] | 969 rpm |
| Motor Element | Gerotor |
| Pressure [Max] | 1800 psi |
| Motor Type | Spool Valve |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.565 in |
| Output Shaft Code | 24 |
| Pilot Diameter | 3.25 in |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Special Features Assembly Code | 0 |
| Port Code | B |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Port Size & Location | 1/2 in NPTF Side |
| Corrosion Resistant | No |
| Series | H Series |
| Flange Orientation | Standard |
| Flow Rate | 45 lpm |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 13.0 LB |
