Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Material | Cast Iron |
| RPM [Min] | 469 rpm |
| Duty | Standard-Duty |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Special Features | None |
| RPM [Max] | 469 rpm |
| Flow Rate | 14 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 6 |
| Case Drain Code | 0 |
| Mount Type | 4 Bolt |
| Bolt Circle Dia. | 3 1/4 in |
| Port Code | A |
| Motor Type | Spool Valve |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Output Shaft Code | 02 |
| Pilot Diameter | 1.75 in |
| Shaft Size & Type | 1 in - 6T Spline |
| Pressure [Max] | 1800 psi |
| Mounting Type Code | B |
| Shaft Type | Splined |
| Case Drain | None |
| Motor Element | Gerotor |
| Series | H Series |
| Rotation | Standard Rotation |
| Special Features Hardware Code | 00 |
| Port Size & Location | SAE-10 Side |
| Flange Orientation | Standard |
| Paint Code | A |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 7.32 |
| Mounting Holes | 3/8-16 |
| Port Location | Side Port |
| Port Type | SAE O-Ring |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Corrosion Resistant | No |
| Flow [Max] | 15 gal/min |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Mounting Hole Size | 3/8 in |
| Weight | 12.1 LB |
