Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| RPM [Max] | 353 rpm |
| Mounting Type Code | B |
| Motor Element | Gerotor |
| Mount Type | 4 Bolt |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 1.75 in |
| Mounting Holes | 3/8-16 |
| Port Size & Location | SAE-10 Side |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Port Location | Side Port |
| Displacement (in³/rev) | 9.7 |
| Seal Material | Buna-N |
| Paint Code | A |
| Splines | 0 |
| RPM [Min] | 353 rpm |
| Special Features | None |
| Material | Cast Iron |
| Shaft Size & Type | Straight |
| Output Torque at Rated PSI (inch/pounds) | 2062 in lb |
| Bolt Circle Dia. | 3 1/4 in |
| Corrosion Resistant | No |
| Output Shaft Code | 08 |
| Case Drain | None |
| Port Code | A |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Motor Type | Spool Valve |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Hole Size | 3/8 in |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 14 gal/min |
| Pressure [Max] | 1650 psi |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Cross Hole |
| Port Type | SAE O-Ring |
| Case Drain Code | 0 |
| Weight | 12.5 LB |
