Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Type | Spool Valve |
| Paint Code | A |
| Material | Cast Iron |
| Case Drain | None |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Special Features | None |
| Inlet Pressure [Max] | 2500 psi |
| Series | H Series |
| RPM [Min] | 353 rpm |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Shaft Size & Type | Straight |
| Corrosion Resistant | No |
| Rotation | Standard Rotation |
| Case Drain Code | 0 |
| Flow [Max] | 15 gal/min |
| Special Features Hardware Code | 00 |
| Port Size | 7/8-14 |
| Splines | 0 |
| Pressure [Max] | 1650 psi |
| Mounting Holes | 3/8-16 |
| Pilot Diameter | 1.75 in |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Output Shaft Code | 07 |
| Port Type | SAE O-Ring |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 3 1/4 in |
| Displacement (in³/rev) | 9.7 |
| Port Size & Location | SAE-10 Side |
| Special Features Assembly Code | 0 |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Mounting Type Code | B |
| Mount Type | 4 Bolt |
| RPM [Max] | 353 rpm |
| Flange Orientation | Standard |
| Flow Rate | 57 lpm |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Cross Hole |
| Port Code | A |
| Weight | 12.5 LB |
