Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 8.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Torque at Rated PSI (inch/pounds) | 1956 in lb |
| Mount Type | 4 Bolt |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features | None |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 8.9 |
| Port Location | Side Port |
| Pressure [Max] | 1700 psi |
| Rotation | Standard Rotation |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Straight w/ Woodruff Key |
| Port Code | C |
| Mounting Type Code | B |
| RPM [Max] | 385 rpm |
| Output Shaft Code | 01 |
| Pilot Diameter | 1.75 in |
| Case Drain | None |
| Mounting Holes | 3/8-16 |
| Paint Code | A |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 385 rpm @ 15 gal/min |
| Special Features Assembly Code | 0 |
| Splines | 0 |
| Mounting Hole Size | 3/8 in |
| Corrosion Resistant | No |
| Port Type | Manifold |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Material | Cast Iron |
| Duty | Standard-Duty |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Flow Rate | 15 gal/min |
| Weight | 12.4 LB |
