Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 BSPP Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Displacement (in³/rev) | 7.3 |
| Port Location | Side Port |
| Port Code | E |
| Seal Material | Buna-N |
| Shaft Size & Type | Straight |
| Flow Rate | 15 gal/min |
| Mount Type | 2 Bolt |
| Mounting Hole Size | 0.535 in |
| Flow [Max] | 15 gal/min |
| Rotation | Standard Rotation |
| Port Size | 1/2 |
| Case Drain Code | 2 |
| Inlet Pressure [Max] | 2500 psi |
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Port Type | BSPP |
| Case Drain | G 1/4 (BSP) |
| Special Features | None |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| RPM [Max] | 469 rpm |
| Pilot Diameter | 3.25 in |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Duty | Standard-Duty |
| Pressure [Max] | 1800 psi |
| Flange Orientation | Standard |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.19 in |
| Series | H Series |
| Mounting Type Code | A |
| Splines | 0 |
| Paint Code | A |
| Output Shaft Code | 24 |
| Special Features Assembly Code | 0 |
| Shaft Type | Straight |
| Corrosion Resistant | No |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Hardware Code | 00 |
| Weight | 13.0 LB |
