Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Size | 1/2, G 1/2 |
| Shaft Size & Type | Straight |
| Inlet Pressure [Max] | 2500 psi |
| Duty | Standard-Duty |
| Paint Code | A |
| Special Features | Free Running Gerotor |
| Flange Orientation | Standard |
| Output Shaft Code | 24 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Seal Material | Buna-N |
| Mounting Hole Size | 0.535 in |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Motor Type | Spool Valve |
| RPM [Max] | 1021 rpm |
| Displacement (in³/rev) | 2.2 |
| Mount Type | 2 Bolt |
| Motor Element | Gerotor |
| Port Type | BSPP |
| Case Drain Code | 2 |
| Special Features Hardware Code | AA |
| Flow [Max] | 10 gal/min |
| Pilot Diameter | 3.25 in |
| Mounting Holes | 0.535 in |
| Rotation | Standard Rotation |
| RPM [Min] | 1021 rpm |
| Corrosion Resistant | No |
| Special Features Assembly Code | 0 |
| Shaft Type | Straight |
| Port Location | Side Port |
| Port Code | E |
| Geroter/Geroler Options | Free Running |
| Splines | 0 |
| Bolt Circle Dia. | 4.19 in |
| Series | H Series |
| Material | Cast Iron |
| Pressure [Max] | 1800 psi |
| Mounting Type Code | A |
| Flow Rate | 10 gal/min |
| Weight | 13.0 LB |
