- Spool Motor
- Gerotor
- Spool Valve
- Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Splines | 0 |
| Pilot Diameter | 3.25 in |
| Special Features Hardware Code | 00 |
| Flange Orientation | Standard |
| Series | H Series |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features | None |
| Case Drain | G 1/4 (BSP) |
| Special Features Assembly Code | 0 |
| Port Type | BSPP |
| RPM [Max] | 469 rpm |
| Duty | Standard-Duty |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1800 psi |
| Inlet Pressure [Max] | 2500 psi |
| Rotation | Standard Rotation |
| Port Location | Side Port |
| Flow Rate | 57 lpm |
| Mounting Holes | 0.535 in |
| Flow [Max] | 15 gal/min |
| Paint Code | A |
| Port Code | E |
| Bolt Circle Dia. | 4.187 in |
| Motor Type | Spool Valve |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Port Size | 1/2 |
| RPM [Min] | 469 rpm |
| Case Drain Code | 2 |
| Output Shaft Code | 01 |
| Motor Element | Gerotor |
| Mounting Type Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Hole Size | 0.565 in |
| Displacement (in³/rev) | 7.32 |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Weight | 13.0 LB |

