Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Special Features Assembly Code | 0 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Port Code | C |
| Port Location | Side Port |
| RPM [Min] | 1021 rpm |
| Mount Type | 2 Bolt |
| Case Drain Code | 0 |
| Case Drain | None |
| Mounting Holes | 0.535 in |
| Seal Material | Buna-N |
| Duty | Standard-Duty |
| Port Type | Manifold |
| Paint Code | A |
| Shaft Type | Straight w/ Woodruff Key |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Displacement (in³/rev) | 2.2 |
| RPM [Max] | 1021 rpm |
| Flow Rate | 10 gal/min |
| Special Features Hardware Code | AA |
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Series | H Series |
| Flow [Max] | 10 gal/min |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Material | Cast Iron |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Inlet Pressure [Max] | 2500 psi |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Pilot Diameter | 3.25 in |
| Bolt Circle Dia. | 4.19 in |
| Geroter/Geroler Options | Free Running |
| Output Shaft Code | 01 |
| Pressure [Max] | 1800 psi |
| Flange Orientation | Standard |
| Mounting Hole Size | 0.535 in |
| Splines | 0 |
| Special Features | Free Running Gerotor |
| Weight | 13.0 LB |
