Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- M8 X 1.25-6H Manifold Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Size | Manifold, M8 x 1.25 Threads, M8 X 1.25-6H |
| Output Shaft Code | 24 |
| Series | H Series |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Case Drain Code | 2 |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| RPM [Min] | 760 rpm |
| Pilot Diameter | 3.25 in |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 4.187 in |
| Splines | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Duty | Standard-Duty |
| Special Features | None |
| Flow Rate | 14 gal/min |
| Port Code | D |
| Material | Cast Iron |
| Paint Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Mounting Type Code | A |
| Port Location | Side Port |
| Shaft Type | Straight |
| RPM [Max] | 760 rpm |
| Special Features Hardware Code | 00 |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.565 in |
| Port Type | Manifold |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Pressure [Max] | 1800 psi |
| Mounting Holes | 0.535 in |
| Displacement (in³/rev) | 4.52 |
| Shaft Size & Type | Straight |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Mount Type | 2 Bolt |
| Flow [Max] | 15 gal/min |
| Weight | 13.0 LB |
