Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Mount Type | 2 Bolt |
| Flow [Max] | 12 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Motor Element | Gerotor |
| Special Features Assembly Code | 0 |
| Series | H Series |
| Seal Material | Buna-N |
| Bolt Circle Dia. | 4.19 in |
| Port Type | SAE O-Ring |
| Special Features | None |
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 969 rpm |
| Splines | 0 |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Special Features Hardware Code | 00 |
| RPM [Min] | 969 rpm |
| Case Drain | None |
| Shaft Type | Straight w/ Cross Hole |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Pilot Diameter | 3.25 in |
| Rotation | Standard Rotation |
| Port Code | A |
| Pressure [Max] | 1800 psi |
| Port Location | Side Port |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 2.8 |
| Mounting Type Code | A |
| Case Drain Code | 0 |
| Flow Rate | 12 gal/min |
| Mounting Hole Size | 0.535 in |
| Port Size & Location | SAE-10 Side |
| Material | Cast Iron |
| Port Size | SAE-10, 7/8-14 UNF |
| Shaft Size & Type | Straight |
| Output Shaft Code | 08 |
| Weight | 11.2 LB |
