Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Size | 1/2, 1/2-14 |
| Port Location | Side Port |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Series | H Series |
| Port Code | B |
| Corrosion Resistant | No |
| Motor Element | Gerotor |
| Mounting Holes | 0.535 in |
| Special Features Hardware Code | AA |
| Flow [Max] | 15 gal/min |
| Duty | Standard-Duty |
| Flow Rate | 15 gal/min |
| Mounting Type Code | A |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain | None |
| Splines | 0 |
| Pressure [Max] | 1350 psi |
| Output Shaft Code | 01 |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| Special Features | Free Running Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Geroter/Geroler Options | Free Running |
| RPM [Min] | 192 rpm |
| Shaft Type | Straight w/ Woodruff Key |
| Paint Code | A |
| Displacement (in³/rev) | 17.9 |
| Output Torque at Rated PSI (inch/pounds) | 3106.61 in lb |
| Rotation | Standard Rotation |
| Case Drain Code | 0 |
| Bolt Circle Dia. | 4.19 in |
| Flange Orientation | Standard |
| Port Type | NPTF |
| Port Size & Location | 1/2 in NPTF Side |
| RPM [Max] | 192 rpm |
| Seal Material | Buna-N |
| Mounting Hole Size | 0.535 in |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Material | Cast Iron |
| Weight | 13.0 LB |
