Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 17.9 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pressure [Max] | 1350 psi |
| Special Features Hardware Code | 00 |
| Special Features | None |
| Duty | Standard-Duty |
| Mount Type | 4 Bolt |
| Shaft Size & Type | 1 in - 6T Spline |
| Flow Rate | 57 lpm |
| Port Code | B |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Pilot Diameter | 1.75 in |
| Splines | 6 |
| Mounting Hole Size | 3/8 in |
| Shaft Type | Splined |
| Seal Material | Buna-N |
| Output Shaft Code | 02 |
| RPM [Min] | 192 rpm |
| Special Features Assembly Code | 0 |
| Material | Cast Iron |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain | None |
| Paint Code | A |
| Port Size | 1/2, 1/2-14 |
| Series | H Series |
| Motor Element | Gerotor |
| RPM [Max] | 192 rpm |
| Motor Type | Spool Valve |
| Displacement (in³/rev) | 17.9 |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Port Type | NPTF |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 3110 in lb |
| Port Size & Location | 1/2 in NPTF Side |
| Mounting Type Code | B |
| Port Location | Side Port |
| Case Drain Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 3/8-16 |
| Weight | 14.0 LB |
