S732-40E-G

S/R Worm Gear Reducer, Hollow O/P Shaft w/ no Base

Item #101840491

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Drives used in a vertical mounting application may require additional pipe plugs and/or grease fittings for proper lubrication and are considered special.
High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.

Specifications

HP @ RPM	2 hp @ 1800 rpm
Family Name	S
Use With	732
Box Height	9 3/8 in
Input (Shaft or Bore) Size	7/8 in
Bolt Centers w/ Std. Base Kit (in)	9 1/2 x 6 1/8
Frame	N/A
Box Width	5 7/8 in
Base to Shaft Center Height w/Low Vert. Base Kit	4 11/16 in
Fan Cooled	No
Input Configuration	Shaft Input
Bolt Centers w/ Vertical Base Kits (in)	11 7/8 x 6 1/8
Base to Shaft Center Height w/Std. Base Kit	6 3/4 in
Box Length	9 in
Max. Input HP @ 100 rpm	0.25 hp
Output Configuration	Hollow Output
Output (Shaft or Bore) Size	1 15/16 in
Motor Application	General Purpose
Output RPM @ Input RPM	44 rpm @ 1750 rpm
Base to Shaft Center Height w/High Vert. Base Kit	6 1/4 in
Input HP @ RPM	1.75 hp @ 1150 rpm, 2.55 hp @ 1750 rpm
Frame Size	Shaft Input, Not a C-Face
Washdown Duty	No
Output RPM @ 1750 rpm Input	43.75 rpm
Center Distance	3 1/4 in
Ratio	40:1
Weight	78.1 LB
EAN or UPC	781711144718