RFWC718-100-B4-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101871428

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact

Specifications

Max. Thrust Load @ 1150 rpm	500 lb/in
Fan Cooled	No
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Output RPM @ 1750 rpm Input	17.5 rpm
Base to Centerline of Output Shaft	2 1/16 in
Box Length	5 1/16 in
Bore Code	B4
Input Configuration	C-Face Coupled
Family Name	RFWC
Keyway Size	1/8 x 1/16
Torque Out @ 1750 rpm	570 in lb
Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
Ratio	100:1
Frame	42CZ
Shaft Assembly Code	G
Box Height	5 3/4 in
Center Distance	1 3/4 in
Frame Size	42CZ
Bolt Center	4 3/16 in x 2 3/4 in
Housing Material	Cast Iron
Box Width	8 7/8 in
Motor Application	General Purpose
Input (Shaft or Bore) Size	1/2 in
HP @ RPM	0.25 hp @ 1800 rpm
Motor HP	1/4 hp
Output (Shaft or Bore) Size	7/8 in
Base to Shaft Center Height w/Std. Base Kit	4.38 in
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Washdown Duty	No
Base to Centerline of Input Shaft	N/A
Max. Overhung Load @ 1750 rpm	500 lb/in
Worm Position	Universal¦Right Angle
Thermal Input Horsepower @ 1750 RPM	N/A
Torque Out @ 1150 rpm	N/A
Reduction Type	Double Reduction
Output Configuration	Left Output
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Lubrication	None
Weight	34.1 LB
EAN or UPC	781711530931