FWC721-100-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101882853

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Frame Size	56C
Torque Out @ 1750 rpm	910 in lb
Max. Thrust Load @ 1150 rpm	700 lb/in
Ratio	100:1
Output RPM @ 1750 rpm Input	17.5 rpm
Washdown Duty	No
Base to Centerline of Input Shaft	N/A
Bolt Center	5 in x 2 7/8 in
Housing Material	Cast Iron
Box Width	9 55/64 in
Torque Out @ 1150 rpm	N/A
Base to Shaft Center Height w/Std. Base Kit	4.81 in
Fan Cooled	No
Reduction Type	Double Reduction
Shaft Assembly Code	G
Center Distance	2.0625 in
Family Name	FWC
Input Configuration	C-Face Quilled
Bolt Centers w/ Std. Base Kit (in)	6 3/8 x 4 11/16
Box Height	6 25/64 in
Lubrication	None
Output Configuration	Left Output
Output (Shaft or Bore) Size	1 in
Worm Position	Universal¦Right Angle
Base to Centerline of Output Shaft	2 9/32 in
Bore Code	B5
Box Length	5 13/64 in
Frame	56C
Thermal Input Horsepower @ 1750 RPM	N/A
Bolt Centers w/ Vertical Base Kits (in)	8 3/8 x 4 7/8
Base to Shaft Center Height w/High Vert. Base Kit	4.88 in
Max. Overhung Load @ 1750 rpm	700 lb/in
Base to Shaft Center Height w/Low Vert. Base Kit	3.13 in
Input (Shaft or Bore) Size	5/8 in
Keyway Size	3/16 x 3/32
Motor Application	General Purpose
Bolt Centers w/ Vertical "J" Base Kit (in)	8.63 x 2.63
HP @ RPM	0.5 hp @ 1800 rpm
Base to Shaft Center Height w/Vert. "J" Base Kit	3.94 in
Motor HP	0.5 hp
Weight	35.1 LB
EAN or UPC	781711524428