FWC718-200-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101882852

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Motor HP	0.25 hp
Thermal Input Horsepower @ 1750 RPM	N/A
Fan Cooled	No
Max. Overhung Load @ 1750 rpm	500 lb/in
Input (Shaft or Bore) Size	5/8 in
Shaft Assembly Code	G
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
Center Distance	1.75 in
Family Name	FWC
Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Box Height	5 3/4 in
Lubrication	None
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Max. Thrust Load @ 1150 rpm	500 lb/in
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
HP @ RPM	0.25 hp @ 1800 rpm
Base to Centerline of Input Shaft	N/A
Reduction Type	Double Reduction
Base to Centerline of Output Shaft	2 1/16 in
Torque Out @ 1750 rpm	660 in lb
Worm Position	Universal¦Right Angle
Keyway Size	3/16 x 3/32
Base to Shaft Center Height w/Std. Base Kit	4.38 in
Box Width	8 7/8 in
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Bore Code	B5
Frame Size	56C
Torque Out @ 1150 rpm	N/A
Bolt Center	4 3/16 in x 2 3/4 in
Output Configuration	Left Output
Washdown Duty	No
Box Length	5 1/16 in
Ratio	200:1
Frame	56C
Output RPM @ 1750 rpm Input	8.75 rpm
Housing Material	Cast Iron
Output (Shaft or Bore) Size	7/8 in
Input Configuration	C-Face Quilled
Motor Application	General Purpose
Weight	26.1 LB
EAN or UPC	781711525494