Find a Service Center
- Reborable Non-Metallic Gear
- 10 Diametral Pitch
- 14.5° Pressure Angle
- 25 Teeth
- 2 1/2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Four ball wear test 40 kg: 63 mm
- More cost effective, quieter running and metallic options
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Keyway | w/o Keyway, w/o Setscrew |
| Torque at 300 RPM | 140 lb/in |
| Origin | Reborable |
| Outside Dia. | 2.7 in |
| Torque at 200 RPM | 161 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Size | 0.75 in |
| Pitch Diameter | 2.5 in |
| Diametral Pitch | 10 |
| Torque at 600 RPM | 114 lb/in |
| Set Screw | No |
| Bore Type | Reborable |
| No. of Teeth | 25 |
| Length Through Bore | 1.62 in |
| Torque at 1200 RPM | 90 lb/in |
| Material | Nonmetallic |
| Pressure Angle | 14.5 ° |
| Hub Dia. | 2 3/16 in |
| Torque at 900 RPM | 99 lb/in |
| Torque at 1800 RPM | 81 lb/in |
| Weight | 0.331 LB |
| EAN or UPC | 781711090701 |
