FWC718-150-B4-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer

Item #101350435

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Lubrication of Acme Nut assemblies determines the ultimate life of the assembly. Improper maintenance and dirty environment will lead to premature failure.

Specifications

Frame	42CZ
Max. Thrust Load @ 1150 rpm	500 lb/in
Bolt Center	4 3/16 in x 2 3/4 in
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Output Configuration	Left Output
Output RPM @ 1750 rpm Input	11.67 rpm
Washdown Duty	No
Ratio	150:1
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
Lubrication	None
Input Configuration	C-Face Quilled
Box Length	5 1/16 in
Reduction Type	Double Reduction
Worm Position	Universal¦Right Angle
Motor Application	General Purpose
Frame Size	42CZ
Bore Code	B4
Output (Shaft or Bore) Size	7/8 in
Keyway Size	1/8 x 1/16
Thermal Input Horsepower @ 1750 RPM	N/A
Input (Shaft or Bore) Size	1/2 in
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
Fan Cooled	No
Max. Overhung Load @ 1750 rpm	500 lb/in
Family Name	FWC
Shaft Assembly Code	G
Motor HP	1/4 hp
Center Distance	1 3/4 in
Torque Out @ 1750 rpm	580 in lb
Torque Out @ 1150 rpm	N/A
HP @ RPM	0.25 hp @ 1800 rpm
Base to Centerline of Input Shaft	N/A
Housing Material	Cast Iron
Box Height	5 3/4 in
Base to Shaft Center Height w/Std. Base Kit	4.38 in
Base to Centerline of Output Shaft	2 1/16 in
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Box Width	8 7/8 in
Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Weight	26.1 LB
EAN or UPC	781711524329